CBDGG - 1,2-ETHANEDIAMINE, O-328

  • MSDS: CBDGG
  • Manufacturer: CHEM SERVICE INC
  • Product Name: 1,2-ETHANEDIAMINE, O-328
  • National Stock Number: 6810-00N066129
Product Identification

Product ID:1,2-ETHANEDIAMINE, O-328
MSDS Date:09/01/1988
FSC:6810
NIIN:00N066129
MSDS Number: CBDGG

Responsible Party
CHEM SERVICE INC
WEST CHESTER, PA 19381
US

Emergency Phone: 215-692-3026

Info Phone: 215-692-3026

Cage: 84898

Contractor
CHEM SERVICE, INC
599 WEST CHESTER, PA 19301-9650 US

Telephone: 610-692-3026

Cage: 8Y898

Ingredients

1,2-ETHANEDIAMINE (SARA 302) (CERCLA)

CAS: 107-15-3

RTECS: KH8575000

OSHA PEL 10 PPM

ACGIH TLV: S, 10 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

LD50 LC50 Mixture:LD50(ORAL,RAT):1160 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CONTACT LENSES SHOULD NOT BE WORN IN
LABORATORY. ALL CHEMICALS SHOULD BE CONSIDERED HAZARDOUS-AVOID
DIRECT PHYSICAL CONTACT! CAN BE HARMFUL IF SWALLOWED, INHALED AND
ABSORBED THROUGH THE SKIN. CAN BE FATAL IF INHALED! EXTREMELY
DESTRUCTIVEOF MUCOUS MEMBRANES AND/OR UPPER RESPIRATORY TRACT. CAN
CAUSE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZS:KIDNEY INJURY. CAN CAUSE AN ALLERGIC
RESPIRATORY REACTION. CAN CAUSE LIVER INJURY. CAN CAUSE AN ALLERGIC
SKIN REACTION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:AN ANTIDOTE IS SUBSTANCE INTENDED TO COUNTERACT EFT OF POIS.
IT SHOULD BE ADMIN ONLY BY MD/TRAINED EMER PERS. MED ADVICE CAN BE
OBTAINED FROM POIS CTL CTR. SKIN:IF NO BURNS HAVE OCCURRED, USE
SOAP & W ATER TO CLEANSE SKIN. INHAL:REMOVE PATIENT TO FRESH AIR.
ADMIN OXYG IF PATIENT IS HAVING DFCLTY BRTHG. IF PATIENT HAS
STOPPED BRTHG ADMIN ARTF RESP. IF PATIENT IS IN CARDIAC ARREST
ADMIN CPR.(SUPDAT)

Fire Fighting

Flash Point:91.4F,33.0C
Lower Limits:5.8%
Upper Limits:11.1%
Extinguishing Media:CARBON DIOXIDE OR DRY CHEMICAL POWDER. DO NOT USE
WATER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:EVACUATE AREA. WEAR APPROPRIATE OSHA-REGULATED
EQUIPMENT. VENTILATE AREA. ABSORB ON VERMICULITE OR OTHER SIMILAR
MATERIAL. SWEEP UP AND PLACE IN AN APPROPRIATE CONTAINER. HOLD FOR
DISPOSAL. WASH CONTA MINATED SURFACES TO REMOVE ANY RESIDUES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID CONTACT WITH SKIN, EYES AND
CLOTHING. KEEP TIGHTLY CLOSED AND STORE IN A COOL, DRY PLACE. STORE
ONLY WITH COMPATIBLE CHEMICALS.
Other Precautions:PERSONS NOT SPECIFICALLY & PROPERLY TRAINED SHOULD
NOT HNDL CHEM/ITS CNTNR. PROD IS FURNISHED FOR LAB USE ONLY! MFR'S
PRODS MAY NOT BE USED AS DRUGS, COSMETICS, AGRICULTURAL/PESTICIDAL
PRODS, FOOD AD DITIVES/AS HOUSEHOLD CHEMS.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN . USE APPROPRIATE OSHA/MSMA APPROVED SAFETY
EQUIPMENT.
Ventilation:THIS CHEMICAL SHOULD BE HANDLED ONLY IN A HOOD.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYE WASH AND DELUGE
SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROC:CONTINUE LIFE SUPPORTING MEASURES UNTIL MED ASSISTANCE
HAS ARRIVED. INGEST:CALL MD IMMED .

Chemical Properties

Boiling Pt:B.P. Text:370F,118C
Melt/Freeze Pt:M.P/F.P Text:47.3F,8.5C
Vapor Pres:10 @ 20C
Vapor Density:0.899
Solubility in Water:SOLUBLE
Appearance and Odor:AMMONIA LIKE ODOR. COLORLESS LIQUID.

Stability

Stability Indicator/Materials to Avoid:YES
INCOMPATIBLE WITH STRONG OXIDIZING AGENTS, STRONG ACIDS.
Stability Condition to Avoid:CORROSIVE. FLAMMABLE. REACTS WITH ACID
HALIDES AND ANHYDRIDES. REACTS WTIH PHOSPHOROUS HALIDES. AIR
SENSITIVE.
Hazardous Decomposition Products:DECOMPOSITION LIBERATES TOXIC FUMES.

Disposal

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS . BURN IN A CHEMICAL INCINERATOR EQUIPPED WITH AN
AFTERBURNER AND SCRUBBER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.